Close
Fire Stop Espumax (cannula 750ml) Ceys View larger
Fire Stop Espumax (cannula 750ml) Ceys

Fire Stop Espumax (cannula 750ml) Ceys

7302010

Buy Ceys products

Ceys products

-

Notify Me

More info

Description

Espumax Fire Stop is a single component foam suitable for filling, fixing and insulation where a classification B1 fire reaction and fire resistance up to 4 hours (RF 240) is required.

Certifications that meet the new regulations (CTE) regarding fire safety classification B1 (ITB Institute certified according to EN 13501-1) and RF240 (ITB Institute certified according to EN 13501-2).

Applications

  • Filling walls adjacent to other buildings

  • Fixing garage doors and aluminum windows
  • Emergency door assembly
  • Sealing escape routes
  • Cortafuergos interior joints in walls and floors
  • Interns sealing cables and vents
  • Insulation and protection of pipes and conduit steps
  • Metal structures
  • Coatings electrical installations
  • Fixing and packing boxes blind

materials

  • All kinds of building materials

  • Concrete
  • Cement
  • Brick
  • Metal
  • Wood
How to use

1. Clean the surface either by removing any dust or grease. Moistened with water by spray after or brush. The application temperature is between + 5 ° and + 30 ° C. Optimal +20.

2. Shake the bottle 20 times before applying. Screw the applicator keeping the container upright.

3. Apply pressing upright and inverted position regulating output points or laces.

4. Fill 50% of the gap or joint. The product initially increases between 1.5 and 2 times its volume.

PRECAUTIONS

1. Wear gloves and goggles attached to the application and cleaning of the container. Maximum 5 minutes. Gloves not reusable.

2. Keep container in a vertical position.

3. The spots should be cleaned before hardening with POLYURETHANE FOAM CLEANER or acetone failing. NEVER USE WATER TO CLEAN.

4. Moisten the support and the fresh foam for fast and optimal expansion. Lack of moisture may retard curing of the foam and cause little burr controlled and / or expansion eruptions.

properties
  • pink, to distinguish it from a standard foam.
  • Once applied, the up to 40 liters foam expands forming a three dimensional structure that makes sound barrier and heat.
  • Touch dry: 5-8 minutes. Once it has dried, after 10 minutes (string 20mm), you can cut, sand, polish or paint.
  • Total drying: 12 hours. Once the foam has cured, water resistant and chemical products in general.

Buy Fire Stop Espumax (cannula 750ml) Ceys

504816

9.9.9.9

10 other products in the category Polyurethane Foam

Close