Fixed mounting adhesive Turbo Plus + Quiadsa

Undoubtedly, the mounting adhesive Fixed + Plus Turbo is the product highlight of Quiadsa. It is a polymer adhesive new generation, quick drying and elastic. Offers tensile strength and immediate subject: 3 seconds. After quick drying, in 20 minutes you can handle the part. You will find that not easily pick and is very easy to apply.

This adhesive comes in cartridges and 290ml tubes 150gramos. Also in Bricolemar we give you the pos ibili dad to buying boxes at incredible prices, and dispensing guns kit with the product to make your job easier.

Among the prefesionales it is easy to find this product in applications such as:

• Glued galvanized sheet, metals or nonferrous ferrous, caravans or trucks elements.
• Glued panels, tiles, plates, tiles, mirrors, sconces, moldings, fixing objects.
• Glass sealing, pipes, roofing, roofing tiles, m arcos PVC / work.

And is that Fixed-Plus Turbo offers excellent adhesion on: concrete, brick, wood, exposed brick, natural or artificial stone, ceramics, glass, metals such as aluminum, iron, zinc, galvanized, etc .., most thermoplastics (except polyethylene or PTFE) or thermosetting.

It also highlights its good adhesion on wet surfaces.

While it is resistant to water, aliphatic solvents, diluted inorganic acids and alkalis, oils and greases must consider offering poor resistance to aromatic solvents, to acids and chlorinated hydrocarbons concentrated.

The yield of the product is about 1 cartridge 2 m2.

How to use fixed polymer adhesive Turbo Plus Quiadsa:

The surfaces applied must be firm and completely clean. It can be applied on wet surfaces.
The sealant / adhesive can be painted, the most suitable time for painting is immediately after the formation of skin the same, about 10 minutes after being applied.

It can be used in proximity to paint booths.

Because of the wide variety of paintings on the market, we recommend testing the compat ibili ness of it with sealant / adhesive.
Once cured , the material can be sanded, painted and / or varnished.

Sealing: Apply using a gun, pneumatic or manual, forming a continuous bead and avoiding forming air pockets. Then smooth with a spatula soaked in soapy water.

Joint size:
The board must be designed according to the movement capability of the sealant. In general, the board must have a thickness between 5-25 mm.
The relationship between width and depth depend on the width of the joint.
In general, for joints over 10mm, the ratio of width and depth should be approximately 2: 1 respectively.
For smaller joints, the ratio should be about 1: 1.