Kit FoamGun S1 + 4 gun cartridges foam projectable Penosil EasySpray 700ml + 500ml fresh foam cleaner

The sprayable foam EasySpray and spray gun FoamGun S1 of Penosil, are the best combination for optimal results in insulation work, and to finish the job included in this kit cleaner fresh foam Quilosa, ideal for cleaning and maintenance of surfaces and the spray gun.

FoamGun gun features S1

Penosil FoamGun S1 is a polyurethane spray gun for industrial and building construction. Suitable for professional application in polyurethane foam assembly work, including installation of doors and windows. It has a strong and safe design. The foam can be precisely measured and the foam flow is adjustable. A stainless steel needle and a universal adapter nonstick prevent gun clogging and facilitate cleaning. The gun has a rubber grip and is lightweight and resistant to solvents. The gun comes with 4 barrel extensions: Extension 2 × 200 mm and with: Extension 2 × 50 mm.

Sprayable foam characteristics EasySpray

PENOSIL EasySpray is projectable insulating foam applicator single projection for better isolating experience. The advantages are many:

• It saves on energy costs. It is specially designed for heat insulation.
• The applicator is compatible with most polyurethane foam guns.
• It provides highly effective sound insulation.
• Insulates with rapid ez and precision surfaces of complex geometry and hard to reach places.
• Its application in the envelope of the building creates an efficient protection against wind and moisture.
• Virtually airtight.

Outstanding features:

High degree of isolation

The combination of the special formula EasySpray the applicator creates a unique structure of high efficiency thermal and acoustic insulation and hermetic properties fantastic. The thickness of the insulation layer can be chosen according to need. In the same way, the number of layers does not have a specific limit.

Reduces thermal bridges

Thanks to the applicator that can be isolated uneven surfaces or hard to reach in which is not possible using conventional insulation materials. Isolation of all inaccessible areas of the building by a single elastic formula to limit thermal bridges in complex structures while reducing the risk of thermal bridges caused by possible movements in construction. By foam insulation, to the contrary that which is done by panels, thermal bridges cause not and does not require the use of separators.

Prevents condensation

Can be used in spray foam EasySpray satisfactorily on uneven surfaces or rounded, such as pipes, tanks and containers of various types. Isolation of cold surfaces by projectable EasySpray foam is a good solution to prevent condensation.

Adheres to:

• Wood
• Concrete
• Bricks
• Most metals
• Plasterboard
• expanded polystyrene
• Roof tiles
• PVC

Scope:

• Cover all surfaces to provide thermal and acoustic insulation.
• places difficult to isolate, where the use of conventional insulation materials is complicated.
• Pipe insulation, attics, balconies, garages, warehouses, tanks and reservoirs.
• Insulation lintels, doors, windows, roofs and other construction areas at risk of thermal bridges.

Technical data:

• Skin formation time (TM 1014): <30 minutes
• Expansion time: <15 minutes
• Full cure time: 24 hours
• subsequent expansion (TM 1010): 100%
• Density: 15-20 * kg / m3
• Flammability (DIN 4102-1): B3
• Resistance to fire (EN 13501-1): F
• Thermal conductivity (EN 12667, TM 1020): 0.033 W / (m · K)
• Sound insulation index RST, w (EN ISO 10140): 62 dB
• Output layer (3 cm) to 1 m2 / per pot
• room temperature for implementation ° C ... + 10 + 30
• Pot temperature during application: 18 + ... + 28 ° C
• thermal resistance of the cured foam: -50 ... +90 ° C

* Depending on the number of layers.