Guidelines extensible and liftable table Folding + 39 Oplà anodized aluminum inox Emuca

Oplà Folding + 39 is a system hidden auxiliary table extraction and rapid rise. Use of this system is oriented salon or home-office, since the minimum installation depth is 390 mm. Also, it can be used in other housing environments. Folding table with Oplà + 39 we get the expansion of the area in which we are working and that it is positioned at the same level, adjusting his position to leave completely flush with the main surface. The system can be installed in modules maximum width of 900 mm and a depth of 390 mm, obtaining an extraction of an area of 370 mm and a load capacity of 40 kg.

The guides are connected by a profile which gives greater stability to the assembly, if we mount the system in a module width of less than 900 mm, this profile will cut stabilizer to fit the required width. Moreover, the mechanism has springs which facilitate the lifting movement of the mechanism.

boards that make up the support surface or the front are not included.

Features of the guidelines:

• System for extracting and lifting a work surface in environments such as living room, office and home-office, 370 mm in length.
• Valid for modules 1 maximum width. 000 mm and 450 mm minimum, minimum depth of 390 mm and 40 kg capacity.
• These guides have a locking system when open to prevent inadvertent closure. The system is hidden, both when in use and when not.
• screws for installation and assembly instruction sheet included.
• The profiles forming the guides are made of extruded aluminum and stainless anodized finish.

video demonstration