408-558mm adjustable bar cabinet Polux anodized aluminum with LED 2.6W 4000K Emuca

Bar hanger closet or dresser with LED lighting and motion detector cable and connector AMP 1.5Mt. For being able to connect to the mains it requires a constant voltage converter 12V DC (not included in the supply).

Its integrated motion sensor enables the ignition to the approach within 1,5mt and ap aga ra the light after 45 seconds after leaving the detection zone.

The tube is made of anodized aluminum with a matte PVC rubber semi-rigid to prevent noise from the hangers and can be cut to fit inside measurement of the cabinet.

Installation very simple thanks to the side supports and mounting screws supplied. The ideal solution for lighting inside the cabinets to facilitate the location of clothing in the dark.

• Integrated motion sensor that enables the switch to approach within 1.5 m and ap aga ra the light after 45 seconds after leaving the detection zone
• Power supply: 12V DC. It requires LED converter 12V for installation (not included in the supply).
• Valid for a hollow interior cabinet between 408-558mm. The tube can be cut to fit as required.
• Anodized aluminum bar with a PVC semi-rigid to prevent noise from the hangers.
• Very simple thanks to the side supports and mounting screws included.
• Detection range of the sensor: 1.5 meters.
• Angle detection sensor 90 °.
• Number of LEDs: 32.
• Color temperature: Natural white (4000K).
• Luminous flux / Brightness: 125 lm.
• Power: 2.6W.
• Illumination angle: 120 °.
• Degree of protection: IP20.
• Energy Class A.

Technical details:

How to mount the hanging bar with LED lighting?