Professional hot water pressure washer 170Bar 780l / h 5,3kW Krüger KH17013CP

Hot water washer professional 170 bar pressure, 780 l / h flow rate and 120 ° C maximum temperature generated.

Suitable for removing all kinds of dirt, particularly oils and fats, due to its high heating water to 120 ° C. Suitable for use in industries such as automotive, industrial, agricultural, livestock, food and so on.

Professional high performance pump with 3 ceramic pistons, rod system / crankshaft and bronze head.

asynchronous electric motor continuous operation (1,450 rpm) with integrated thermal protection, insulation class F, TST and DSS systems and stop the machine in case of lack of gas oil.

Main features:

• Professional high performance pump with three ceramic pistons, rod system / crankshaft and bronze head.
• asynchronous electric motor continuous operation (1,450 rpm) with integrated thermal protection in all phases of the winding.
• IPX5 motor protection with class F insulation high efficiency, higher performance and lower power consumption.
• Union pump motor by elastic gasket (4 bearings online).
• electric cable of 5 m.
• Control oil level and pressure gauge in glycerine bath.
• Automatic bypass valve pressure independent regulation.
• Safety valve discharge overpressure.
• Maneuver low voltage 24 V.
• TST system, total stop electronic timer.
• DSS system, which does not allow the engine to start if the pressure of the hose is not less than 15 bar.
• Water takes direct input filtering machine.
• High performance boiler with minimum emission of gases well below those levels by the EEC.
• Boiler maximum security system and provided with air cooling tube coil steel. Complete stop the machine in case of lack of gas oil.
• Gas-oil pump anti-seizure.
• Control flume level of gas oil.
• Regulation thermostat temperature 30 ° C - 120 ° C.
• Fuel gas-oil "A".
• Output low pressure chemical.
• Chassis gas oil reservoir built polyethylene.
• Supports and accommodations for accessories.
• 2 fixed wheels Ø20 cm and 1 cm Ø12 swivel to facilitate mobilization.

Standard accessories:

• AP Hose R2A 5/16 "10m with fast connection
• Gun thermal extension 500 mm
• Stainless steel lance. 500 mm with adjustable nozzle-holder
• High pressure nozzle ¼ "- 25 ° depending on model

Technical data: