Welder inverter Solter icon 2055 PRO

This team brings the power inverter at its best. Together with its constructive DDR patented, innovative design, its great ability to work under demanding conditions and environments intensive and its unmatched results in reliability, they also provide an excess of power for intensive work in electrodes up to 4 mm.

The reverse iCon 2055 is ideal for industrial repairs, assemblies, metal constructions, boiler ... Make welding all types of coated electrodes such as rutile, basic, stainless steel and aluminum, and TIG welding steels and carbon steel. It incorporates a digital control panel.

It includes set of tweezers.

Main features:

• Arc stability and control regardless of distance electrode material, thanks to regulation by ARCSENSE.
• Double automatic ventilation, acting only when the team pre cisa.
• STAND-BY position when the equipment is not in operation.
• Minimum consumption for its high energy efficiency.
• Equipped with anti-stick devices, Arc-Force, Hot-Start and Lift-Arc (TIG)
• Connectable to generators with a wide range of operating voltages.

Technical data:

• Intensity MAX .: 200A
• 40 Yield: 50%
• 60% intensity (100%) at 40: 180A (120A)
• Setting range: 5-200A (20, 2 -28V)
• MMA usable electrodes: 1.6 to 4.00 mm
• Connection: 230V - 1Ph
• Range of use: 180V - 300V
• Load voltage: 68V
• Power consumption max .: 9,5Kva
• Imax: 42A
• Ieff: 29,7A
• Fuse: 16A
• Ventilation: DOUBLE - AUTO
• Weight: 6.4kg
• Panel regulation: ICON DIGITAL SOLTER
• Standards: EN-60974-1, EN-60974-10
• Protection Index: IP23C
• TIG usable electrodes: 1.0 to 3.2 mm
• Dimensions: 430x175x325mm

Other features of the line of iCon Inverters

The housing is made of high strength materials and by double injection special characteristics of durability and ergonomics (DDR System, Dual Density Reinforcement patented SOLTER) are achieved.

This double injection rubber is utilized to three basic functions. First, we get a nice touch and not slippery to handle. It also takes advantage, this double injection, to integrate a foot and side guards on the basis of the team, favoring stability of the same on slippery surfaces, and finally, in the non-visible equipment, strengthens securing the electronic circuit preventing this receives accidental bumps.

Design of the control panel

The control panel has been designed so that changing parameters is very intuitive and fast. Not having to remember long sequences for modifying the parameters of the equipment, It promotes better use of all pos ibili This ties.

Total protection

The equipment incorporates all protections necessary to ensure proper operation. Temperature sensors ensure that the components are kept within the operating range.

Monitoring the supply voltage assures us that the work equipment within the margins provided, and if surpass, be disconnected to prevent possible anomalies.

Ventilation

The equipment incorporates intelligent vent system, which is only activated if the computer is working or the internal temperature is elevated. This will prevent us collect dust equipment, reducing maintenance intervals. This does not entail that the user must be careful not to generate metal powder particles while operating the unit.

automatic shutdown

The device has an automatic stop for protection of the equipment, which is enabled when it is 10 minutes without work automatically rearm when welding continues.

Network connection

Connect the welding machine to a socket with earth, if used network extensions, verify that are suitable for the power section of the equipment. The voltage must be 230 V ± 15. Outside this voltage range the machine can not function. It is mandatory that the electrical outlet available ground connection.

Placement of generators

ICON ICON models and PRO are ready to run an electric generator. However these generators must meet certain requirements. We recommend using generators with a constant power to the least 8KVAdel asynchronous type alternator. If the generator does not have enough power or output voltage is outside the boundaries of work equipment, may cause ap aga days of the arc and consequently loss of weld quality in the worst case can cause damage in the team.